Location��HOME > Products > Details

SBD-I series of Bias power supply

SBD-I series of bais power supply is Digital control power.It works in high frequency conversion mode of Level two , Unipolar pulse or Dc mode on the output . The power supply voltage adjustment by changing the basic supply voltage to achieve,Voltage regulating circuit has 1% stable rate.Pulse modulation circuit to generateb0-100% pulse width , Dc and pulse arbitrary conversion .Because the output voltage of the power supply and pulse width for independent adjustment,In the process to meet the desired voltage at the same time, by changing the pulse width to control the workpiece temperature rise. Dc, pulse at any time optional way to make the power output is applicable to broader tool coating, decorative coating and other high-end equipment.

Power range  10-80KW
Input power AC380V three phase four wire system AC50-60HZ + 10%
Output mode  Pulse / DC
Output voltage 0-180V 0-500V 0-1000V
Pulse frequency 40KHZ
Pulse percentage 0-100% continuous set
The stability of the output voltage ratio The whole process of stable voltage and the 1% voltage accuracy
Cooling mode 10-40KW : air-cooled ,40-80KW : water-cooled
The use of the environment

Ambient temperature : 0-40C

Ambient humidity : Relative humidity �� 85%

Clean air��No dust��Non corrosive flammable gas��Good ventilation

Cooling water

Clean��does not contain minerals and other soluble substances

Water temperature : 20-30

Pressure : 0.15 + 0.05Mpa

Communication mode Analog/RS485/RS232
Description The power supply output data according to the use need to be adjusted accordingly


<< Back